Quote:
Originally Posted by ckau
Admend: The sleave cannot be any larger dia. than the flat mounting surface around the through bolt hole on the heim ball. otherwise you will get binding. In my case. I used a 3/8 heim with a mounting surface of 5/8
|
Thanks for the idea ckau....I see that you are definitely an innovator on the yerf dog from the past posts that I have read about your heim changes. I unfortunately just purchased new ball joints and tie rod ends from bd and I don't weld so I am a little stock with what is available.
From the sounds of it, I will have to wait for BD to get the standoffs in stock unless someone else has found similar ones somewhere else?