View Single Post
  #110  
Old 12-19-2011, 08:33 PM
300cpilot's Avatar
300cpilot 300cpilot is offline
Contributor
 

Join Date: Jun 2011
Location: Meridian Id
Posts: 258
Default

I made the mistake of really reving it up while on the jack stands and for those that do not know, the faster your wheels spin the bigger around they get. So my wheels were 2-3 inchs off the ground and about 40-50mph they expanded and contacted the cement floor and burned off my epoxy floor paint! The only thing that saved me from a huge mess was that I had strapped the buggy to my second buggy. Luckily it did not rocket through the garage and out the back wall!!!

I found that a change of +10 degrees causes the bogging down. Front wheels down 10 degrees from level and it runs great. This is a very little change, so I will be taking the carb into a local shop. I am going to have them rebuild the carb cause once I got it opened it had a lot of varnish in it.

I also learned that this was tuned for +32 to -10 degrees so some rejetting is in order also. I can see the light at the end of the tunnel!
__________________
2012 Polaris RZR570 stock!
Reply With Quote