View Single Post
  #3  
Old 07-19-2010, 01:10 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

http://www.menintools.com/linkage.html here's pic's of govenor linkage
and here's pic's of the throttle to govenor arm from the kart the kid's are actually driving right now-sorry for the quality and all the dust/dirt!
hope this helps with that problem.
To add a kill switch I need to know if there is a kill switch already on the side of the motor. If there isn't you'll have to pull the side cover off the motor and attach a second wire from one of the coil leads to get it outside the cover and to a switch location of your choice.I can walk you thru the process if needed.
If you can post pic's like Buggymaster asked it would help us to see possible issues
Attached Images
File Type: jpg tecumseh carb 1.jpg (92.4 KB, 43 views)
File Type: jpg tecumseh carb 2.jpg (94.2 KB, 36 views)
Reply With Quote