The CN250 rectifier is 3-phase and will work with the 11-pole stator, but connectors do not match. Buggy Depot has a kit to address this.
If you have the really small silver rectifier with your 6-pole, you may burn it up with heavy load on the 8-pole if you let your battery run down. The slightly larger rectifier used on DC Powered CDI's does better with the 8-pole - Expect just over 100w out of this system.
There are optimizations you can do to the wiring to prevent line loss and you can swap over to a manual choke and AC powered CDI to get the most out of any stator if you're willing to do some rewiring.
|