[jmarquar]

I have a 150 that has been in storage for years. The brakes actually worked fine, but after hauling it home, cleaning it up, washing it off & so on, the Brake switch will not activate, no brake light, no starting. I took the switch all the way out, and there is no fluid, long story short I bought a new MC, and bled out the brakes- all is well. Except the brake switch still does not activate. I push the brake pedal down, loosen the brake switch until some fluid comes out, tighten it up, repeat. and repeat and repeat. Getting fluid out the threads of the brake switch, but it does not activate. Any ideas what I am missing or just keep doing what I am doing?