The belt size is 743-20-30 I like the Gates brand personally. I have always used an impact and highly recommend the DeWalt 18v DW059 cordless. I would be advisable to go ahead and replace the rollers while you are in there. You also nee to make sure you get all of the old belt out of there so pulling the clutch off would be wise. Pieces of the old belt will get down inside of the clutch pulley as well. Disassembling the clutch/pulley assembly and replacing the main spring and cleaning everything would be advisable as well, but w/o an impact it won't happen. On a side note if you do the main spring use extreme caution and research how to do it right to avoid injury. I'd post a link on a tutorial but I'm not sure it is allowed. Good Luck. BTW that belt price is way off. I've never paid over $30 for a Gates 150cc belt.
|