Whats up everyone. Here's a thread for ya guys. I picked up this 3202 a few months ago. Bought a new 6.5 clone engine and was good to go. I never thought the front end was enough but breaking a ball joint was enough to put me over the edge. I picked up a 2005 unyson 150 black widow for 80 bucks. It was only missing the motor. I cut the front end off and well, the pics tell the rest. I started off with cutting the front end clean off the yerf dog. Then i Cut the front end off the quad. I got everything centered where i wanted it then welded. I went with heavy duty 4x4 truck u joints for my steering. I left the front end on the quad the same. I figured the steering and suspension geometry was perfect so why change it. I went with 5/8 pillow blocks to mount the steering shaft and a 5/8-3/4 bushing to size up to the bigger bar. I also Widened and raised the side bars of the frame for the new bucket seats I'll be putting in. Still a lil work to do but pretty much wrapped up. She'll be seein Glamis Presidents day weekend Feb 22
