Praise be to the Lord!
I got it running. It turned out that even though I replaced the stator, the new pickup coil that is part of the stator was not close to the stator housing pickup. It was like 3/16" away and did not allow for me to do any more adjustments.
So solution was that I pressed the pickup down closest as possible to the housing picking as it could go and then bent it to where it was 17 thousands gap.
I guess, the pickup bracket must have had an incorrect bend in it.
Thanks
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.
Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.
Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
|