Update on this reverse assembly.
I bought the Carter Talon 150. Rear wheels bolt right on the stock Yerf hubs. I had a machinist buddy make some spacer/adapters to fit the front 4 lug hubs on the Yerf 5/8" spindle. Works out great and added about 3-4" to the track width of the front.
I got the reverse assembly installed yesterday and it works very well. I did use the output shaft from the Talon, all and all it was a fairly simple procedure. I had to space the axle sprocket over to the left about 10 mm. My daughter really likes having reverse and I am also thankful!
Between the wheels/tires and the reverse assembly, the Talon 150 was the best $100 I spent on this Spiderbox so far! Add in the nice shocks I took from the front of the Talon and put on the rear of the Spiderbox and it was a win, win, win!
|