There is a link in your post to flikr with the pictures. Because of the angle of the picture it is hard to be 100% certain but it appears the left wheel is cambered out, the right looks OK. It also appears looking at the front shot that the left lower control arm is not arched as the right control arm. But as I said this could be due to the angle of the picture. I would look at both lower control arms and compare to each other. The lower arms should have a downward arch. It appears from the pics the left arm could have struck something bending it up thus pushing the lower out. Compare the arms to each other, they have to be identical. Also measure each arm for total length, I'll bet the left is longer. I should still be able to get parts for the Helix.
|