Does it say runmaster 2 on it somewhere? I have never seen a Kinroad with the same pattern on all 4 hubs. The original Kinroads all had 4 pole stators using the small rectifier using one yellow and 1 white wire, they than went to the 6 pole which used the same rectifier. When the went to the 8 pole the flywheel was a larger diameter and the rectifier had 1 white and 2 yellow wires as did the 10 pole along with the same flywheel as the 8 pole. The small rectifier is the size of a zippo lighter where as the large one is 3 times the size. But it all depends on how the buggy was wired since the new buddies all have 8 pole stators but use the small rectifier. Keep in mind that the larger the stator the more HP it will rob from the engine and unless you are running a stereo or a lot of high wattage lights the large stator today is useless if you convert the lighting to led.
|