Quote:
Originally Posted by Masteryota
I would start by disassembling the front end and closely inspecting the frame for tweaks and cracks around the tongue welds. The tongue should angle slightly upward, somewhere around 10 degrees. The bulkhead may be toast, but still worth a second look.
|
Sorry I'm not familiar with these terms. Is the bulkhead the piece that basically holds the suspension all together? Tongue welds?
So I do a lot of trail riding. Previous yerfie I had worked well because the suspension was pretty soft. I also do a lot of slow technical offroading (over rocks, up steep hills). I'm going to get the yamaha blaster shocks for the rear.
I would like to lift the front higher. I will be getting hubs and bigger tires in the future, but would the yamaha blasters work up front too?
So the brake doesn't work and I tried bleeding it but there was no pressure coming out. Could this be a bad line? If so, where could I find a replacement for this?
Oh and what was up with the website? It wasnt working for me on Sunday