Started on the back wiring. Getting all the main wiring connections inside the box is going to be tight. I have the 11 pole. The plug and play from BD. Thou nice, it adds alot of clutter. I can save alot of room if take out the plug in plastic connections, and just wire it with good quality round protected connections.
I've had to take zip ties to keep the clips together. They not all a tight fit.
So is any reason not to get rid of the plastic clip Connections? I guess other then needing to place the system, and be able to just clip a new one in.
Like said, the box is tight, and wires going to be crossing over each other alot. But no difference then how was before. But thinking a good protected connector on each wire, would be better. Or not????? Guess is my question.
The new box is going to be placed at same location as old. When I get my block out, would be easy enough to unplug the wires I need to protect. Add some extra wire, then plug back in to the wire system. Going to mount the block out behind the seat, on the frame.
Again, any reason why this may not be a good idea?
|