The dealer I bought mine from is supposed to get the cord this week. In the interim I made my own cord out of some electrical materials. If you have the same setup as I do, there should be a switched lead (white plastic with two spade terminals inside) hanging behind the carburetor. I attached a piece of decent gauge wire to two female spade terminals. The female spade terminals slid right on the switched lead. (You may may to crimp the spade terminals slightly) The amplifier connection had two round posts. For this end I took two crimp wire connectors and connected them to the opposite end of the spade terminals. The crimp connectors slid right over the posts on the amplifier. (Again you may have to crimp slightly) My kids have ridden for a few hours and the connections have never come off. For the player connection, there is a port on the amplifier (right behind passenger headrest) the an MP3 player can plug into.
|