Lowes or home depot in the plumbing section, you can pickup a piece of strait trap pipe and in the same general area there is a rubber coupler (clamps included)do not know for what it is used but all you will have to do is trim one end and it fits the carb perfectly. The pipe will come 6",8",10",or 12" 6" or 8" is what most use. You will need a UNI or like for the filter. You will also have to fatten up the main jet or you will lean out the engine. You can also just go with the stock box 2SlickNick offered if you feel the performance is OK for your application. The UNI and jet will give you a bit more power and the engine will run better.
|