the d.b.motor wont have the same boilt pattern as your 150.you will have to build motor mounts. if you get the hole bike you could cut the frame out that holds the motor and weld it to the swing arm(the easiest way).keep in mind no reverse and most d.b.have a kick start but you can find some of them with electric start.
it would be best to get the hole bike if you can find one cheep so you can ride it and get the bugs worked befor you put it on the buggy and you will need some things off the bike.
cluch cable
cluch lever(or build a cluch pedal)
all the wiring
also dont pass a good atv motor
so can you weld and do fab work?
|