OK, now we're getting somewhere.
Remove that "T" and run a hose from the intake manifold to that fitting on the top of the carb in that third pic.
Ckau has given you some solid help.
Check/replace those jets
Fix that vacuum hose from the intake to carb
Check that valve cover vent hose
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
|