Yes you'd probably throw old plugwires out! Both ends of the plugwire should be twist installed not permanently molded.- try untwisting the end for removal.The over rubber cap my be heatshrunk but should slide off when you twist it. I was referring to the sparkplug end.Your plug wire now is set-up for the threads on the end of the plug to stay secured by a small C-clip, that grips the threads.On an automotive plugwire the smooth tapered plug end is secured with a wide C-clip- that smooth/tapered end is threaded on the plug. I've replaced a plugwire with an old one off my Harley-just had to unscrew the tip off another automotive style sparkplug and screw it on the sparkplug on the buggy.Did that make sense?
|