Burned her up good last night, must have added 10 pounds of wire into it! And ground 8 of it back off
Fully welded all the seams of the new rear tubing pieces and welded the underside of the extra plating i put on the front end a while back. Saving all the little cut off bits of metal comes in handy. I'm going to drill a couple drain holes into the angle iron so it doesn't hold water down there. Finally got around to putting the first part of the Jeep spare tire holder on, it's my bash plate for the front. Already crushed one of the rectangular box sections i put in between the front and rear mounting plates, so i had to do some hammer and dolly work on it.