Thread: Doing the Heim joint mod for my spiderbox need advice
View Single Post
  #58  
Old 11-23-2012, 07:51 PM
T3beatz's Avatar
T3beatz T3beatz is offline
Heavy Contributor
  

Join Date: Oct 2011
Location: St. Louis
Posts: 650
Default
Yep, cones will be fine, My shocks on the front are 13" and I have moved the mounting holes inward (made new brackets) so my angle is much more steep and I use the cones and I have no issues. The bungs just have to be welded in at the correct angle with the shocks you intend to use (just about level to the ground) I eyeballed most of my stuff and it turned out good enough! lol

Also to add, you will want to get some 1/2" to 3/8" reducer inserts for the heims (from the same seller).
http://www.ebay.com/itm/1-2-3-8-REDU...item5ae1846ad7

these are the cone spacers you need: http://www.ebay.com/itm/3-8-CONE-SPA...item5643da5323
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.