Quote:
Originally Posted by Pripyat
I just realized that the head on scrappydog is EGR. What does using an EGR head entail? New valve cover?
|
Run a non egr valve cover and block off the egr on the head
https://www.amazon.com/NCY-EGR-Block.../dp/B01M1NL97F
Frankly if you have the tools and know how to port a head I would just make one.
For cams with my limited research the biggest issue with cams for these things is the overlap. They pretty much all use the factory specs or don't stray far from it with only the difference in lift. I think if somebody had the time, tools, materials, and money to custom grind some cams to test IMHO I'm almost positive there are gains to be made. I'm almost sure if somebody even took say the specs of an a11 or a12 and dialed in the lobe separation it would wake it up even more. Of course custom grinds get into big money.