View Single Post
  #9  
Old 08-25-2010, 09:29 PM
toughfordbronco's Avatar
toughfordbronco toughfordbronco is offline
Lite Contributor
 

Join Date: Aug 2010
Location: CT
Posts: 32
Talking pics

Ok so heres some pics of what I am getting into.
I was able to start it with statring fluid Monday nite and then after it warmed up it would start no problem without starting fluid other then pumping the pedal while pressing the start button . So I am leaning towards the choke solenoid . Right direction?
So I found 2 places that sell parts one is buggy depot and BMI wahts yalls view on these places .
I am going to do the heims, rod ends and spindles to start . Right direction?
Any idea about fuel line,
and the wiring would helpful what 'bout the carb line ?
Thanks
Attached Images
File Type: jpg bent.jpg (92.2 KB, 26 views)
File Type: jpg bent spindle.jpg (92.1 KB, 23 views)
File Type: jpg is this correct.jpg (86.0 KB, 25 views)
File Type: jpg not sure.jpg (83.5 KB, 24 views)
File Type: jpg off bottom of carb.jpg (88.8 KB, 24 views)
File Type: jpg uhh thats not right.jpg (90.9 KB, 21 views)
File Type: jpg worn spindle and tie rod end.jpg (88.4 KB, 25 views)
File Type: jpg lights maybe.jpg (79.4 KB, 22 views)
__________________
2004 Yerf DOG 150CC GY6
NGK PLUG
CDI UPGRADE
HIGH OUTPUT IGNITION COIL
125 JET
GUTTED EXHAUST
RED NECK UNI STYLE INTAKE WITH PRE FILTER

New front end parts :
SPINDLES
BALL JOINTS
TIE ROD ENDS


http://anysoldier.com

Support our Troops send them a card letter or magazine subscription candy playing cards twizzlers gum homemade cookies

Last edited by toughfordbronco; 08-25-2010 at 09:32 PM.
Reply With Quote