I appreciate the compliments. The wife/kid see new red paint and don't appreciate all the underlying labor.
I mocked up some schematics earlier this evening. Plan is to put the lights on the battery circuit with an on/off switch. I knew using the existing light wiring (off the regulator) with an LED would be a bad idea.
Is 38 watts too much or am I going to have to upgrade the stator? I assumed the stock lights were at least that.
The front shocks are awesome at 10mph. I put 100psi air in them as there was hardly any pressure at all. They max out very easily. I plan to work on them in the next couple weeks. I can get 120psi out my compressor. I believe this will be OK for transportation but they need help for anything more than that.
In 30mins this link should go live with a video of some low speed riding on stock rfy's except for pressure increase to 100psi. Tons of travel considering we are barely rolling.
https://youtu.be/r8TYPbqyXd8