i'll be going new mikuni TM-24 out of the box with a 1.5 needle and 130 main. Not goign to mess with anything used for this.
tweaked the float a bit and dropped from a 125 jet down to a 122.5. pretty much ran as weak as it was before adding the pump, seemed to take a while to pull any midrange power, then it'd kind of wake up at 3/4. didn't have the grunt to pull 3rd/4th strong from a slow roll. Plug is clean as a whistle.
I'm wondering if the sort of weird look to plug pics 3-4 (kind of powdery) is burned up anti-seize. I try not to get it on the base or upper two threads, but you know how that stuff is ...
Think I'll leave everything alone over the weekend and toss a 127.5 in it. good surprise was that my 125 is right in the middle of about 10 jets i have, so i can go both ways in 2.5 increments. Guess I forgot about the one batch i ordered.
Last edited by x-bird; 11-14-2013 at 06:42 PM.
|