The air gap is usually about an 1/8 and not critical unless the flywheel magnets are gone- simple test, flathead screw driver a 1/4" away should be attracted to the magenets. Can you post pic's of the flywheel,stator and coils and any wires coming from the stator?I can't really read the schematic!!! Is the regulator the item that's in the center?To be able to check the stator coils you'll have to have the ohm values from the factory.Simple test would be to hook up a test light to the coil plug coming from the stator to see if the issue is the coil, test light lead to ground and touch light tip to coil connection to see if it's getting anything when the motor is turning over.
Last edited by metalstudman1; 11-30-2011 at 12:22 AM.
|