View Single Post
  #47  
Old 07-11-2017, 11:05 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Ok there are 2 checks , first is the exciter coil which is part of the stator. Not sure of your wire colors but they should be close. Exciter coil with meter in the R x 1 ohm range 50-350 ohm range measured across the bl/r and g wires. Second is the ign. pulse gen which you referred as p/u coil,50-170 ohms measured across the bu/y-g or g/w-bu/y depenging on which colors are used. Hope this helps, if not e-mail or call me 662-301-1563.
Reply With Quote