Shock Replacement
I am looking to upgrade my shocks on my Chinese buggies.
The rear I am going to go with the ones with oil canister and the front no canister. I know the front is pretty much set on a fixed length but on the back it appears you can add more length.
Should I use a longer shock in the back going from standard 13" to lets say 14 or 15"? Will it work properly and give more travel?
Also on the back frame where the swing arm attaches, there are two holes on a bracket, an upper and a lower. My buggies seem to use the upper. The other is about 2"or so lower. Is there a benefit to putting the swing arm on the lower one? Seems it would live the body up.
Charles
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.
Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.
Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
|