Not sure if the gravity feed is sufficient enough to supply the carb. These came stock with a fuel pump, and one of the guys on the other board keeps driving home the point about the fuel pump needs to flow X amount of fuel per minute in order to keep the carb from starving at WOT. So I'm not sure.
Second intake hose is a common mod to allow the engine to breathe better. (Free HP)
Wiseco stickers would be the piston. 82mm piston is the last size you can go before you need to re-sleeve the cylinder. Just so you know.
Boyesen reeds are aftermarket reeds. (cheap performance boost)
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
|