Start with UNI air filter, carb re-jet,NCY "red" CDI, "orange coil", iridium plug, and exhaust... 13/39 sprockets
Or just to "test the waters," 1500 rpm clutch springs, 1500lb torque spring, 12gr Dr Pulley sliders( possibly 11gr or 10.5's) Then add the engine mods on!
59mm BBK & a 60mm crank(+2mm stroker), some port work, A11 cam, 30mm carb....she'll be running with the 250's!
__________________
kliff
Last edited by kliff; 08-28-2010 at 02:36 AM.
|