Engine Won't Start No Spark Replaced Most Parts
So all of a sudden my gy6 150 engine died and won't start.
I replaced the stator setup
I replaced the coil
I replaced the cdi
I replaced the stator
I replaced the spark plug
I checked the ground and its solid
I charged the battery fully
Still no spark. I tested the kill switch wire by grounding 4 and removing 5 pin as I have seen suggested, no success.
What could be left.
__________________
Buggy 1
150cc Buggy
A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust.
Guang Max 150
All stock but to be like Buggy 1 with all koso cvt.
Roketa 150
Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats.
|