View Single Post
  #1  
Old 04-11-2011, 02:51 PM
Turf Turf is offline
Lite Contributor
 

Join Date: Jan 2011
Posts: 31
Default Hammerhead 250 No Spark

I have had idle problems since I bought this buggy in December. Seems as if the choke is not working. Yesterday I started looking at the wiring and found that the yellow wire that goes to the choke was not connected. I connected the yellow wire then started the buggy. The wire did not seem to make much difference. I put everthing back together and now the buggy will not start. Tried spraying gas into the carb and it did nothing. Pulled the plug, grounded the plug and turned the key. No spark. Can anyone help with troubleshooting this issue.
Reply With Quote