I've never seen this type of brake set-up but it appears that the black plate w/3 holes is the swingarm/lever.I see the brake pedal cable has a clevis, a pin should go through it and through the top hole in the black swingarm/lever.The center hole is going to go between the plates in the first photo with the spring along side the plate with a pin running through frame,swingarm/lever & spring to release the brakes. I see wear patterns on the black plate towards the bottom where the long portion of the spring has been rubbing.the remaining hole (bottom) in the swingarm/ lever should fit in the center slot of the brake band w/ a pin through it. Make any sense?
|