jim,
the upper mounts are very very slightly offset back from the lowers.
not enough to comp for the caster angle built in via the stub.
also, on mine, about 3/16" off from left to right side.
musta got welded on a monday.
while i was out looking i found a piece of .......1/4" thick steel that used to support the back of an office chair.
18" long, perfect for making extended control arm mounts from.
gx150, thanks but they gotta be 10"; i already bought the tires
Last edited by speedshopmike; 11-16-2011 at 04:34 PM.
|