View Single Post
  #8  
Old 06-15-2017, 11:48 PM
Dallastx Dallastx is offline
Lurker
 

Join Date: Jun 2013
Posts: 29
Default

The carbide is my favorite buggy. It was the first one I ever bought and modified. I've had three to date. When I first got ours it wouldn't climb very well either. I upgraded it to the 1500 yellow main spring and 10 gram sliders in the variator. I installed an a13 cam and open filter. 130 main jet. And I also installed a 39 tooth axle sprockets weigh a solid 235lbs on a light day and my passenger weigh in at about 170. We look like clowns in a clown car but the carbide will make it up to all the high points at wolf pen gap trails in mena Arkansas without issues. I've learned so much on this forum and credit the help and wisdom from the guys on here that go out of their way to help out. I hope my setup can be of some guidance. Like I said. The carbide is my favorite machine. And I'm up to a 650 Joyner and an 800 FI Roketta. Orange coil and Yamaha blaster shocks all the way around lets us rip through anything as well without killing our backs.
Reply With Quote