I think I got a plan, I will used an ATC 200m regulator, which had electric start and battery. The diagrams are so close to each other besides the lighting coil wires going into the rectifier/regulator and then out to the battery, lights, and starter. I hope this works out like I hope, I know the LED lights I was planning on using don't tolerate voltage fluctuations very well, or AC voltage for that matter. I am assuming the AC CDI will work the same as the signal wire from the generator runs the same as the 200s.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee
'04 Dazon Raider 150 'modded'
|