On the spindles I made it out of a folder and taped it together,put it on to see that it fit.Then took the pieces and traced them out on flat bar and cut then out with a torch.I did design them my self.
I used the 4x4 hubs because it is cheep cant break them, they will last for ever on a buggy and I wanted to use dot tires. Dont forget its easy, they bolt on and they will be on the back also.the back are f150 hubs and outer cv are f150, they have the same spline as a 930 cv that I have for the inter.
the motor is a gsxr 750 it makes i think 130hp stock,it has bigger jets 145 i think and after market exaust.The bike was fast it went around to 90 in first gear.
Last edited by roysheepdog; 01-03-2013 at 11:03 PM.
|