[Fink]

Picked up a Spiderbox a few months ago and am doing a 420cc swap on it. My kids have Go Karts and I wanted one that I could ride around in with my youngest daughter so her and I are building this one for us. Sons is a Streaker 8 and my oldest daughter has the Yerf-dog 3002. Cut up the Swing arm. The 150cc engine that came with it was is bad shape and the 420cc was on sale. Going to go with a heavier shock in the rear if anyone has suggestions on what a good shock for the rear is that will give me some extra lift would be awesome. I did a quick mockup of the engine yesterday and today I tore down the front bulkhead to get ready for all the new BDX parts that I ordered. Getting the works. going with a 22X11-8's in the rear and a 19x7-8's in the front. Also getting the Steering rack sent out for extra teeth cut into the rack from buggy depot.

This Go Karts for My 6 year old and me to keep up with my older 2 kids, She wants to paint it red with flames(we'll see how that goes). I'm just enjoying building something playing with the welder.

parts on order are:
Deluxe Flexpruf Steel Step-Down Axle - 1" to 3/4" (Standard) Size*: 42''
#40 Sprocket 60T with 1" bore
#40 Sprocket 9T with 3/4" bore
H93262W #40 Chain (66 Links) x2
401640 Master Link Pitch: #40 (401640) x2
400243 Sprocket / Brake Hub with 3-1/8" Bolt Pattern Bore Size: 1'' Bore
K260050 Galvanize 4 x 4 Wheel Hub (1" Bore) x2
HUB, FRONT WHEEL X2
A9037 Billet Aluminum Wheel Hub for Metric Rim 4x110mm rear hubs (1" Bore)
4x BDX HD Ball Joints
1x BDX HD Reinforced Front Bulkhead w/ 8" Bolts
2x BDX HD Reinforced Upper A-Arms 3rd-Gen
2x BDX HD Reinforced Lower A-Arms
2x BDX HD Reinforced Spindles 3rd-Gen
BDX Alignment Standoffs
3" Lift Kit and shocks!!!
2x New Tie Rod Ends