View Single Post
  #3  
Old 03-17-2014, 08:07 PM
JERSEYDEVIL's Avatar
JERSEYDEVIL JERSEYDEVIL is offline
Supporting Vendor
 

Join Date: Feb 2011
Location: port charlotte fl
Posts: 831
Default

I'm on my phone which leads to short impatient answers. Sounds like there is slop the steering wheel shaft and the bushing it passes through. disconnect the steering shaft from the steering wheel jerk the steering wheel back and forth if there's play the bushing is a little worn.you might be able to get away with taking an extra snap ring between the bushing and a snap ring that holds it in place.or you can go larger hole in a thin washer anything would work that would take up the slop doing the bushing in the snap ring. this is if I'm understanding you correctly.
__________________

"LUCIFER" JOYNER JD400,
CROSSHAMMER 250R,
YERF GX150,
CROSSFIRE MBX150,
BMS 800V-TWIN
'16 RZR 900s ,
'17 ACE 900XC,
'99KX250,
'94 KDX200,
'18 SSR SR170TX


Last edited by JERSEYDEVIL; 03-18-2014 at 04:11 PM.
Reply With Quote