Could either one of you do a quick voltage check on your stator? Just to see if I'm right about what I should be seeing? No problem if you don't want to, I get that someone might not want to mess with a perfectly working stator..lol
But if you aint scared I would appreciate it. With the stator completely unplugged from everything you should see 20v to 40v AC from each wire.
So with you voltmeter set to 200 ACV you would ground one lead and hold the other lead to 1 of the stator wires while cranking or running the motor. Repeat test on each of the 3 stator wires.
|