Quote:
Originally Posted by Numbers
Are you currently starting it by jumping the solenoid ? Some of the wiring diagrams I have seen, show a " kill wire " coming from the CDI to a KILL dash switch and on to the ignition switch. There is a ground from the kill switch also. So, three wires (2 for the kill wire and one for the ground wire ) at the kill switch. You sound as if you have two ? Do any of your wires from the kill switch go on to the ignition switch and if so will keeping your ignition switch disconnected prevent the buggy from shutting off ?
|
I just asked someone that same question..lol
I'm not jumping the solenoid and yes there is a kill wire to my cdi.
I have a keyed ignition switch, and a kill switch.
3 wires to the ignition, 2 to the kill.
None connect from one switch to the other directly. That's not to say in some convoluted route through the harness they don't somehow connect..lol
I'm going out to take a look and investigate the possibility that having the switch disconnected might be the problem.