I'm scared to hook it back up and start it..lol
I don't want to kill my new stuff. I did however check to see if there was continuity between the kill switch wires and the ignition switch wires, there was none.
Theoretically the 2 wires at the kill switch should ground the cdi and stop the engine from running.
The green wire at the kill switch has continuity to ground, and the black/white wire at the kill switch has continuity to the black/white wire at the kill circuit on the cdi.
Touching the 2 together is essentially grounding the kill circuit at the cdi. But the engine still runs...
|