Stumped again..lol
With the carb cleaned and the valves adjusted it starts and idles like a Cadillac, hot or cold. Problem is it still wont rev. Throttle response is amazing at low rpm's.
I took a squirt bottle of water to the intake and all the hoses, hell I soaked the whole carb to no avail.
I hooked my little hand held vacuum pump and hit the gas. The needle went to 0. I couldn't get a good reading on vacuum at idle because it's not a liquid filled gauge.
It's a 30mm keihin carb, the float level is at 18mm, has a 132 main jet. I forget but I think the idle jet was a 38. The slide needle didn't seem to be adjustable so it is where ever it comes from the factory.
|