I'm helping a friend to re-wire his buggy harness after a total meltdown. The buggy is a chinese import and was made by wenling zhenshen but have not been able to get much more than that. Researching the web leads me to think this is a Honda clone and I bought a full electrical harness here in Australia. I have installed it, after a bit of verbal abuse, and I have a key operated ignition switch working, an electric start, working and turning the engine but not firing, a strong spark. But no combustion. Also, after half a dozen or so cranks of the engine, smoke is coming from the stator. I stripped it out and found the green wire was melting so I re-insulated it and put it all back. So that's my story, what should I be asking to pursue this tragedy to its conclusion
