Well, the problem is the washer does not matter if you don't have the spacer between them. The washer will still push on the inner race and it will pop out (or in) just like the ones you have now. It will take longer with the better bearings but it still may do it eventually.
Once I get a chance I will take pics of my setup so you can see what I mean.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|