sorry for the delay guys. It was near 100* over the week end so i was out on the lake.
OK, here's my set up.
UNI filter
6" PVC tube
Miknui VM 26-606 carb
30mm aluminum intake manifold
Stock Howhit head with home port work
port matched head to intake manifold
A11 cam
NCY 58.5mm nicasil cyl and piston
NCY CDI
Bando coil
Stock head pipe with a FMF slip on muffler.
This set up ran great with the CV carb on it until I had that chain tensioner/ motor mount break.
We installed a temporary mount, I made a WOT test run, which it did great. But at the end of the run i did a 180* on the short grass and it stumbled and died.
After that, it never ran right with the CV again. I bought another new CV to replace it, didn't have any different results with it.
Checked valve adjustment, but nothing changed.
So I decided to install the VM carb and have good results except for the closed throttle after WOT pass problem explained above.
Kliff, I saw the bubbles in the filter when the tires were off the ground.
But I can see the filter from over my shoulder when running the cart.
I'll get that video up soon.
|