Quote:
Originally Posted by BuggyLegend
OK, I finally got a chance to do all this, that guide was super easy to follow and everything went very smoothly. I cleaned, scrubbed, blew out, and repeated. My only problem now is that whenever I test the pistons out before I put it back on the buggy, when I push them down in they are still pretty reluctant to come back out. I was thinking when I reassembled it that the new fluid would lubricate it some, but if it didn't I didn't want to waste the fluid by having to drain it again and do something else. SO, I was wondering if it was ok to put a little grease on the pistons to help them out?
|
Do not put grease on any rubber brake parts , it will swell them up and ruin them ! 
__________________
Dazon 150 single Mods ...Uni-Filter, 30 mm Kiehin pumper carb, FMF power pipe, 30 mm Intake pipe, Hi Rev CDI, Orange HV coil, 10,000 rpm Tiny Tach,Works Performace Shocks 12" F Blaster 14" R . Pearl Perf Ceramic 13.5 rollers, Gates Power Belt,Kenda Claws F&R
|