Depending on the model year, he may have the Gen 3 spindles, which are the same as the BD ones, but for sure need to get the stock ball joints out of there. Either do heims, or pony up the $$ for the Buggy Depot ball joints, and if you plan on serious riding, chop the sheet metal balljoint tabs off and weld on some 1/4" tabs before they rip off and leave someone stranded or hurt.
Pretty much what we are saying is, read what we all have done to the front end, and make your decision from there.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee
'04 Dazon Raider 150 'modded'
|