Thread: bad starting
View Single Post
  #3  
Old 03-30-2013, 11:33 PM
sargentargent sargentargent is offline
Lite Contributor
 

Join Date: Mar 2013
Posts: 77
Default

Do what Tom suggests and if you know how, pull out the carb and check the float. The float bowl is on the bottom and has 4 screws and a thin rubber type gasket. I was told by a vendor that sometimes the carbs ship out with a gel type substance inside that is supposed to dissolve over time. Sounds like the float is not working if the carb is overflowing. As far as the muffler...Really can't say where to get one that is silent. Best of luck.
Reply With Quote