Quote:
Originally Posted by SYCARMS
On my karts I use a double pole toggle( on/off) for the ignition and accy's with a momentaty toggle for the start, but you can also use a push button switch. My switches are the sealed type. If you get the good ones you will pay about $17.00 each. Autozone has then for a fraction of the cost but they don't last and when you have to replace them you will come out ahead using the more expensive one. I get mine from either Summit or Jegs. I had even had some from Napa and Carquest and although they lasted longer than the Autozone ones they are still not the quality as the Summit or Jegs. TOM
|
SYCARMS, i'm in the process of rewiring my Carter XTV, can you post a picture of your set up so i can get a general idea, also if it's not too much trouble are the wiring the same way as you would take it off the ignition (3 wire) = (3 wires to toggle switch) ?
Frank