Since my buggy had the 4 point harnesses all I had to do was to drill a mounting hole and reinforce it by welding a bushing in it for the 5th point belt which comes up between the legs. On yours however you will have to weld mounting tangs behind center of each seat on frame bar just below head rests. The lap belt, one half will attach on either outer side of the seat, the center mount will acomodate both other halves of the lap belt for each seat. The shoulder harness will attach to an added tab centered behind each seat, then the submarine belt comes up between the legs and will attach to a mount, to a cross bar front center of each seat. The biggest advantage for these belts is that it not only holds you in , it also keeps you down during a rollover keeping your head from hitting the ground which can easily cause a neck compression. When you have the 5 point's installed the arm restraints use the lap belt portion to attach to.
|